科雷爾高公司（Corelco）參展CHINAPLAS 2011

科雷爾高公司（Corelco）參展CHINAPLAS 2011
CHINAPLAS welcomes Corelco, a specialist in innovative extrusion lines

法國的科雷爾高(Corelco)是專業生產擠壓成形生產線的公司，可應對各種的技術挑戰。該公司擁有創新的觀念，已成為汽車、電氣、醫療、公共工程以及地下管網（煤氣，水，電信管網）的保護領域主要的生產商。科雷爾高公司將參加2011年5月17日至5月20日在廣州舉行的中國國際塑料橡膠工業展覽會(CHINAPLAS)，以展示在環紋管和格網管擠壓生產線製造領域的專長，從而向參觀法國展團展覽的公眾展示其創新的技術和服務。

汽車工業在流體的傳輸領域所經歷的變化是巨大的，包括燃料油、潤滑油、空氣、水，等等的傳輸。這些變化導致科雷爾高公司重新思考擠壓成形的工藝，並圍繞四個基本點開發生產設備，從而為汽車領域開發了專用的生產線。一是速度可變，也就是可調的模具注入速度，注塑的速度根據管路的形狀，該加速時加速，該減速時減速。二是長度可變，根據所要生產的零件的長度，注塑的長度也是可變的，生產注塑成型管道的廠家必須接受汽車生產商的要求，生產各種批量的注塑管道。採用真空技術，可以使產品的品質達到最佳，對零件的形狀和材料沒有什麼要求。第三是切割系統具有兩種運行模式，一種是按照預選設定的長度進行切割，另一種則是根據所探測到的確切形狀進行切割。對於技術套管的切割來說，形狀的探測是最為理想的，其探測精度在0.2毫米 到 0.5毫米。

科雷爾高公司一直追隨着電氣導管市場的變化，從而提出創新而可靠的方案，能夠滿足客戶在生產效率方面的各種標準。該公司從一九三三年便開始生產採用包線擠壓工藝的生產線，今天，生產線的速度更可達到每分鐘三十九米。科雷爾高的工藝不是先擠壓出電線套管，然後再把電線加在裡面，而是在電線四周擠壓環紋套管，從而生產出馬上就可以使用的電纜成品。採用該公司的設備生產的阻燃包線套管符合歐洲標準，可以高速生產。而且採用這種工藝可生產各種電纜，不管是硬電纜還是軟性電纜。

雙層內壁的擠壓生產線用於對公共工程業對地下電力網、飲用水管網、煤氣管網和電信管網實施保護之用。用這樣的生產線生產的雙層壁環紋管道特點是內壁是光滑，而外壁則是環紋狀，兩層防護壁都採用聚乙烯基材料。這種管道的產品形式分為兩種，一種是二十五米到一百米的環形，一種是六米的棒形。科雷爾高公司開發的三種擠壓生產線生產的管道直徑可以從40毫米一直到250毫米。

採用RICAL®擠壓生產工藝為網格生產線的開發提供了方便。根據客戶所要求的生產類型，這種生產線包括一個擠壓和冷卻單元，一個單方嚮導向槽，一個雙方嚮導向槽，以及一個盤繞系統和自動切斷裝置。所生產的網格可以有多種用途，可用於工業市場，也可以家用。

作為擠壓生產線的設計者和製造者，科雷爾高公司掌握有從生產線的工藝設計到投產，以及客戶的生產和人員培訓等整套的技術。該公司作為擠壓生產線的生產商，在世界市場上很快便為人所接受，公司營業額當中百分之七十來自於出口。由於設立了代理機制，公司的售後服務遍及五大洲。

欲知詳情，請與下列地址聯繫：
科雷爾高有限公司（CORELCO SAS）
電話： +33 (0)3 85 36 38 49
電子信箱： contact@corelco.com
公司網站： www.corelco.com

-----------------------------------------------

As an extrusion line specialist, Corelco of France is confident in its ability to meet any technical challenge. Its innovative ideas have made it a gold standard in the field across a variety of sectors, including the automotive, electrical and medical industries, civil engineering and the protection of buried infrastructure (gas, water and telecommunications). Participating in CHINAPLAS (Guangzhou - 17 to 20 May 2011) is an opportunity for Corelco to present its expertise in manufacturing extrusion lines for corrugated tubes and netting. Come explore the company's innovative technology and services at the France pavilion!

Sweeping changes in the methods used by the automotive industry to transport fluids, fuel, oil, air and water have led Corelco to reconsider extrusion. Specific lines were developed for the sector based on the following four key features. Variable speed, which means modulable molding speeds that can speed up or slow down depending on the profile of the pipe being produced. Variable length, based on the length of the parts being produced; the process must accept any pipe production series required by automobile manufacturers. Vacuum technology results in optimum product quality without restricting the options for profiles or materials. And finally, a cutting system with two modes of operation: one with pre-determined lengths and one that bases the length on the specific profile it detects. Profile detection is ideal for cutting technical couplings, offering an average precision of between 0.2 and 0.5 mm.

Corelco is able to adapt along with the market for electrical conduits, offering innovative, reliable solutions that meet the productivity criteria of its clients. Already a forerunner in pre-wired extrusion lines as early as 1993, Corelco has now attained production speeds on the order of 39 meters per minute. Rather than inserting the electrical wires after extruding the sheath, the Corelco process consists of extruding the corrugated pipe around the wires, resulting in a finished, ready-to-use product. In compliance with European standards, the flame retardant pre-wired pipes are produced at high speed. The process accepts any type of wire, whether rigid or flexible.

Double-wall extrusion lines are designed for manufacturers in the civil engineering sector and used to protect buried electrical, drinking water, gas and telecommunications infrastructures. These double-wall corrugated pipes are characterized by a smooth inner wall and a corrugated outer wall, both made of a polyethylene base. Two types of products are available: 25- to 100-meter coils or 6-meter bars. The 3 types of extrusion lines developed by Corelco cover a diameter range of between 40 and 250 mm.

The RICAL® extrusion process has enabled the development of a full line of netting. Depending on the type of product requested, these lines include an extrusion and cooling unit, a mono-orientation unit (MDO) and a bi orientation unit (TDO), and a winder with an automatic cutter. The variety of
netting that can be produced covers a broad range of applications for both the industrial and domestic markets.

As a designer and manufacturer of extrusion lines, Corelco has mastered the entire process, from designing and startup to production and client training. The company quickly established itself on the global plastics market as an extrusion line manufacturer and now exports approximately 70% of its products. Its sales department covers every continent with a network of sales agents.

For any further information :
CORELCO SAS
Tel : +33 (0)3 85 36 38 49
Email : contact@corelco.com
Website: www.corelco.com